Coatings bond to concrete mechanically. If the surface is smooth, sealed, dusty or contaminated, even an excellent product will struggle to hold. That is why preparation is the single most important part of every floor we install, and why we prepare by grinding rather than relying on acid etching alone.
We also offer preparation as a standalone service — removing old coatings, glue and mastic, grinding slabs ahead of other flooring, and repairing damaged concrete — for homeowners, contractors and facility managers.
Preparation services
Diamond grinding
Removes the weak surface layer and creates a profile coatings can bond to.
Coating and adhesive removal
Stripping failed coatings, paint, glue and mastic down to sound concrete.
Crack, spall and joint repair
Filling and leveling damage so it does not telegraph through the finish.
Slab evaluation
Looking for moisture, contamination and previous treatments that affect system choice.

How we prepare a slab
- 01
Inspect
Visual inspection plus tests appropriate to the project — such as moisture testing and checks for sealers or oil.
- 02
Remove
Old coatings, sealers and adhesives are removed mechanically.
- 03
Grind
Planetary grinders and edge tools create an even profile across the floor and up to walls.
- 04
Repair
Cracks, spalls, pits and joints are repaired with materials suited to the system going down.
- 05
Clean
The slab is vacuumed thoroughly so the first coat goes onto clean, sound concrete.
Common issues we address
- Peeling or failed DIY coatings
- Oil and fluid contamination
- Cracks and spalled edges
- Sealers that block adhesion
- Uneven or patched slabs
- Glue and mastic from old flooring


About moisture in concrete
Even in a dry climate, moisture can move up through a concrete slab. Excess vapor can cause some coatings to blister or lose bond. On projects where it is a risk, we test before we coat and recommend a moisture-tolerant primer or alternative system where results indicate it.
Preparation is not the place to save time. We would rather explain why prep takes the time it does than return later to fix a floor that was rushed.
Not sure this is the right system? Our coating systems guide compares the options side by side, or we can recommend one after seeing your floor.
Concrete Surface Preparation — frequently asked questions
Why grind instead of acid etching?
Grinding removes weak surface material and creates a consistent, measurable profile. Acid etching can leave residue and does not remove sealers or coatings, so we prefer mechanical preparation for coating work.
Is grinding dusty?
Our grinders are connected to vacuum systems that capture most of the dust at the source. We also protect adjacent areas as needed.
Can you prepare floors for other flooring types?
Yes. We grind and remove coatings and adhesives ahead of other flooring installations for homeowners and contractors.




